padidekimia

padide kimia.co

Cement silo filter
Cement silo filter is a device that can be installed on the upper part of the silo or next to the silo, which separates the cement particles from the air coming out of the outlet valve of the silo, and then automatically separates the separated cement particles into the cement silo. Returns.

Method of operation of cement silo filter:
The air coming out of the upper valve of the silo first enters the filter and in the passage of it, special cloth bags are placed that absorb the cement dust and pass the clean air through them, and finally the cement dust is absorbed by the wind pressure. In the reverse direction, it is separated from the surface of the bags by the jet pulse system, which operates automatically, and is poured into the cement silo.

Device installation:
The cement silo filter system is easily installed on the disaster area or next to the silo.
This machine is easy to install, does not require the installation of a specialist installer, and can be installed by a welder according to the manufacturer's instructions.

Silo filter installation tutorial video
installation and implementation:
You need a 220-volt single-phase power supply and an air compressor to start.
(If you have a suitable air compressor in your workshop, you can use it for filters.)
In the custom type of device, the silo filter system is set and controlled by Wi-Fi and a special application of Padideh Kimia Company that is installed on your phone.

Repair and maintenance:
This device does not require special service and maintenance, the long life of the bags is one of the advantages of this device.
All parts of this device are produced by Padideh Kimia Company, and you will have no problem repairing and replacing parts.

Filter function:
By installing this filter, clean and standard air comes out of the silo. It prevents the loss of cement and keeps your workshop area clean.
This device has a twelve month warranty on performance and three years after-sales service.

Filter selection:
This filter is originally designed for cement and similar materials, and can be installed on top or next to a variety of material silos, and can be used for any other dry dust.
When choosing a filter, you should consider the number of times the silo is filled in a period of one month, and the more times the silo is filled in a month, the larger the filter should be.

We have designed and produced three types of filters.
Kochog silo filter for workshops that have cement discharge up to twice a week.
Medium silo filter, workshops that have more than three times a week and less than ten cement discharges,
Large silo filters, workshops that drain cement more than twice a day.
Note: In smaller silo filters (bunker discharge time into the silo may increase).
Our production filters are produced in two types, high installation and low installation, which are selected depending on your working conditions.

Technical specifications of construction:
The body of the silo filter is made of iron sheet, which is painted with kiln paint, and inside the device, the polyester fabric filters are installed vertically by the holding basket. Inside each filter unit is an aluminum venturi. This device is cleaned by jet pulse system, silo filter control is done by an intelligent microcontroller

The appearance of the filter body is designed and made in two types of squares and circles. Due to the aerodynamic shape of the body, it is more resistant to wind and storms due to its aerodynamic shape. And it is recommended to use this type of filter in silos with high altitude and places with high wind

Cement top silo filters
top filter silo

email :این آدرس ایمیل توسط spambots حفاظت می شود. برای دیدن شما نیاز به جاوا اسکریپت دارید

WhatsApp number :00989138685585

Iran, Isfahan, Tiran, Tiran Industrial Town